Jeep 1997 Grand Cherokee Service Manual page 608

8V - 8 OVERHEAD CONSOLE SYSTEMS
REMOVAL AND INSTALLATION (Continued)
AMBIENT TEMPERATURE SENSOR
(1) Disconnect and isolate the battery negative
cable.
(2) Remove the radiator grille unit. Refer to Group
23 - Body for the procedures.
(3) Locate the temperature sensor, on the radiator
support behind the grille (Fig. 6).
(4) Unplug the temperature sensor wire harness
connector.
(5) Remove the temperature sensor mounting bolt
and remove the sensor.
(6) Reverse the removal procedures to install.
Fig. 6 Temperature Sensor Remove/Install
ZG