Table of Contents
Advertisement
Preparing the Printer
Menu Options for Firmware Update
Select the menus on the control panel as described below.
Settings > Firmware Update
Update:
Check if the latest version of the firmware has been uploaded to the network server. If an update is
available, you can select whether or not to start updating.
Notification:
Select On to receive a notification if a firmware update is available.
Saving Power
The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will affect the product's energy efficiency. Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it off automatically if it is not
connected to the network for 30 minutes.
Saving Power - Control Panel
1. Select Settings on the home screen.
To select an item, use the
2. Select General Settings > Basic Settings.
3. Do one of the following.
Note:
Your product may have the Power Off Settings or Power Off Timer feature depending on the location of purchase.
❏ Select Sleep Timer or Power Off Settings > Power Off If Inactive or Power Off If Disconnected, and then
make settings.
❏ Select Sleep Timer or Power Off Timer, and then make settings.
>
>
Saving Power
Saving Power - Control Panel
u d l r
buttons, and then press the OK button.
73
Advertisement
Table of Contents
