Cut Sheet Presenter Module, Holding Plate, Printer, Plate, Lower Paper Guide, Plate, Paper Guide Holder, And Holder, Paper Roll - Epson EU-T532 Technical Manual

Confidential
Cut sheet presenter module, Holding plate, printer, Plate, lower paper guide,
Plate, paper guide holder, and Holder, paper roll
Disassembly
step Disassembly part name
C.B.(M3 × × × × 4)
1
2 Plapoint
3
4 Cut sheet presenter
module
C.B.(M3 × × × × 4)
6-34 Assembly and Disassembly
× 2 Remove two C.B.(M3 × × × × 4)s at the bottom of the cut sheet presenter module.
× 1
Remove the plapoint on the cable side of the cut sheet presenter module.
seal, paper exit
guide
Put your fingers on/around the seal, paper exit guide and pull the cut sheet
presenter module fully to the near side to turn downward.
Insert a screwdriver between the shaft, cut sheet presenter frame and the
× 1 recover feeding A assembly, and remove two upper C.B.(M3 × × × × 4)s to
× 2
remove the cut sheet presenter module.
<Reassembly Point>
Do not forget to paste seal, paper exit guide on the upper frame, cut sheet
presenter unit.
recover feeding A assembly
Disassembly procedure
upper frame, cut sheet presenter unit
1
2
cut sheet presenter module
shaft, cut sheet
presenter frame
cut sheet presenter module
Rev. A