Disassembly and Assemb/y
3.2.5.3 Exit Chute Removal
1. Remove the top cover. (Refer to Section 3.2.l.2.)
2. Remove the fusing unit. (Refer to Section 3.2.5.l.)
3 Remove 2 CBB screws (M3 x 8) securing the fusing unit top cover, and remove it.
Remove 2 screws securing the exit chute, and remove it.
4.
3.2.5.4 Exit Roller Removal
1. Remove thetopcover. (Refer to Section 3.2.l.2.)
2. Remove the fusing unit. (Refer to Section 3.2.5.l.)
3 Remove 2 CBB screws (M3 x 8) securing the fusing unit top cover, and remove it.
4. Remove 2 E-rings securing the exit roller, and remove it.
3-24
Figure 3-39. Removing the Exit Chute
Figure 3-40. Removing the Exit Roller
Rev. A