40-2 disable wac
Purpose
Used to disable the Web-based Access Control function.
Format
disable wac
Description
The disable wac command will disable the WAC function.
Parameters
None.
Restrictions
You must have administrator privileges.
Examples
To disable the WAC function:
D G S - 3 2 0 0 - 1 0 : 4 # d i s a b l e w a c
C o m m a n d : d i s a b l e w a c
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
40-3 config wac
Purpose
Used to configure the parameter of the Web authentication.
Format
config wac { vlan <vlan_name 32> | ports [<portlist> | all] | state [enable | disable] | method [local |
radius] | default_redirpath <string 128> | logout_timer [infinite | <min 1-1440>] }
Description
The config wac command allows you to configure Web authentication setting.
Parameters
Parameters
ports
state
method
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
A range of ports that enable or disable the WAC function.
Specify the port state.
Specify which authenticated method is used.
342