Replacing The Front Lan Connector And Board; Required Tools; Preliminary Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

"Closing the rack door" on page 84
Ê
"Enabling BitLocker functionality" on page 107
Ê

13.3.3 Replacing the front LAN connector and board

Field Replaceable Units (FRU)
Average task duration: 15 minutes

13.3.3.1 Required tools

Preliminary and concluding steps: tool-less
●
Replacing the front LAN connector: tool-less
●

13.3.3.2 Preliminary steps

Perform the following procedures:
"Disabling BitLocker functionality" on page 85
Ê
"Opening the rack door" on page 64
Ê
"Locating the defective server" on page 56
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê
"Removing the fan box" on page 183
Ê
RX300 S7
Upgrade and Maintenance Manual
Front panel
70.
443