Replacing The Processor - Fujitsu PRIMERGY RX300 S4 Options Manual

Replacing the processor

6.2 Replacing the processor
V
CAUTION
Only processors of the same type may be used on the system board. The
second processor must have the same clock frequency and the same
cache as the first processor. For dual operation, use a suitable multipro-
cessor operating system.
Ê Open the server as described in the
Ê Remove the air duct over the main memory (see
page 22).
Figure 16: Removing the heat sink
Ê Loosen the four screws in a crossover pattern.
Ê Loosen the heat sink by turning it back and forth and then lift it out.
36
chapter "Preparation" on page
Options Guide
Processors
"Removing the air duct" on
21.
RX300 S4