Installing An M120 Ac Power Supply; Figure 87: Removing An M120 Ac Power Supply; Figure 88: Rear Of The M120 Power Supply Showing Midplane Connector - Juniper M120 Hardware Manual

Copyright © 2010, Juniper Networks, Inc.

Figure 87: Removing an M120 AC Power Supply

Figure 88: Rear of the M120 Power Supply Showing Midplane Connector

Installing an M120 AC Power Supply

To install an AC power supply (see Figure 89 on page 177):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Move the power switch on the power supply faceplate to the standby position.
2.
Chapter 14: Replacing M120 Hardware Components
175