Changing The Default Values For The Portal Agent Interface - Nortel Web Center Portal Installation And Administration Manual

July 2004 Configuring Symposium Web Center Portal for e-mail and telephony integration
Changing the default values for the Portal
Agent Interface
Introduction
This section explains how to change the default values for the Portal Agent
Interface. The file UserDef.vbs contains the following default values for the
Portal Agent Interface:
Feature
auto-refresh interval
!
number of transactions downloaded when agent
!
logs on
is the agent allowed to download all transactions?
!
maximum number of transactions that can be
!
downloaded when a range is requested
is the agent allowed to change the refresh time?
!
Note: By default, the automatic refresh feature is turned off. Nortel Networks
recommends that you do not use automatic refresh or that you use it sparingly.
Frequent refreshing uses system resources and can cause network congestion
and decrease server performance.
To change the default values
1 Navigate to the default directory (C:\Inetpub\wwwroot\Agent).
2 Open the UserDefs.vbs file with a text editor such as Notepad.
3 Change the values as required.
4 Save the file.
Installation and Administration Guide
Default value
15 minutes
50
No
50
Yes
225