Nortel Web Center Portal Installation And Administration Manual page 685

July 2004
Automatic call distribution group
An entity defined on the switch for the purpose of call distribution. When a
customer dials an ACD group, the call is routed to any agent who is a member of
that group.
Automatic call distribution routing table
A table configured on the switch that contains a list of ACD-DNs used to define
routes for incoming calls. This ensures that incoming calls not processed by
Symposium Call Center Server will be queued to ACD groups and handled by
available agents.
Automatic call distribution subgroup
An entity defined on the switch to assign supervisory responsibilities. Each
subgroup has one supervisor phoneset and a number of agent phonesets
associated with it. Agents can log on to any phoneset within their ACD
subgroup. The supervisor must log on to the supervisor phoneset to monitor his
or her assigned agents.
C
call destination
The site to which an outgoing network call is sent. See also call source.
call presentation class
A collection of preferences that determines how calls are presented to an agent.
A call presentation class specifies whether a break time between calls is allowed,
whether an agent can put DN calls on hold for incoming ACD calls, and whether
an agent phoneset displays that the agent is reserved for a network call.
call priority
A numerical value assigned in a script that defines the relative importance of a
call. If two calls are in the queue when an agent becomes available, and one call
is queued with a higher priority than the other, the agent receives the higher
priority call first. See also skillset priority.
call source
The site from which an incoming network call originates. See also call
destination.
Installation and Administration Guide
Glossary
685