July 2004
10
Accept the default values in this window, and then click Next.
Result: The following Wizard window appears:
11
Click Add.
Result: The Identification window appears.
12
In the Login name box, type a name for the caller account. You can choose
any name, or use a name that is familiar to you, such as NGenDist.
13
In the Password box, type the password for the caller account.
Tip: If you typed NGenDist for the login name, you can use the same
NGenDist password that is used in Symposium Call Center Server, or you
can use a password of your choice.
14
In the Confirm password box, type the same password again.
Installation and Administration Guide
Installing and configuring pcAnywhere
461