Cisco Catalyst 3560X-24P Command Reference Manual page 23

Cisco ios release 12.2(55)se

Hide thumbs Also See for Catalyst 3560X-24P:

Table of Contents

This guide is for the networking professional using the Cisco IOS command-line interface (CLI) to

manage the Catalyst 3750-X and 3560-X switch, or the Catalyst 3750-X switch stack, referred to as the

switch. Before using this guide, you should have experience working with the Cisco IOS commands and

the switch software features. Before using this guide, you should have experience working with the

concepts and terminology of Ethernet and local area networking.

This guide provides the information that you need about the Layer 2 and Layer 3 commands that have

been created or changed for use with the Catalyst 3750-X and 3560-X switches. For information about

the standard Cisco IOS Release 12.2 commands, see the Cisco IOS documentation set available from the

Cisco.com home page by selecting Technical Support & Documentation > Documentation > Cisco

IOS Software.

Switches running the LAN base feature set do not support Layer 3 features.

This guide does not provide procedures for configuring your switch. For detailed configuration

procedures, see the software configuration guide for this release.

This guide does not describe system messages you might encounter. For more information, see the

system message guide for this release.

For documentation updates, see the release notes for this release.

This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

Commands and keywords are in boldface text.

Arguments for which you supply values are in italic.

Square brackets ([ ]) means optional elements.

Catalyst 3750-X and 3560-X Switch Command Reference