Rep 8.4.1 User Interface Pwb (Scc) - Xerox WorkCentre 5020 Service Documentation

3. Thread the wire harness of the Control Panel as shown (Figure 5).
Repairs and Adjustments
REP 8.3.1, REP 8.4.1
Figure 5

REP 8.4.1 User Interface PWB (SCC)

Parts List on PL 8.4
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1. Remove the Control Panel (REP 8.3.1).
2. Turn the Control Panel upside down.
3. Remove the Support Brackets (Figure 1).
1 Remove the Tapping Screws (6).
2 Remove the Support Brackets (3).
July, 2007
4-58
WARNING
Figure 1
WorkCentre 5020
Initial Issue