XCC system management port LEDs
This topic provides information on LEDs of XCC system management port.
The following table describes the problems that are indicated by LEDs on XCC system management port.
Figure 148. XCC system management port LEDs
LED
Description
Use this green LED to distinguish the network connectivity status:
XCC system
1
management port
• Off: The network link is disconnected.
(10/100/1000
• Green: The network link is established.
Mbps RJ-45)
Ethernet port link
LED
XCC system
Use this green LED to distinguish the network activity status:
2
management port
• Off: The server is disconnected from a LAN.
(10/100/1000
• Green (blinking): The network is connected and active.
Mbps RJ-45)
Ethernet port
activity LED
External Diagnostics Handset
The External Diagnostics Handset is an external device that is connected to the server with a cable, and it
allows quick access to system information such as errors, system status, firmware, network, and health
information.
ThinkSystem SD530 V3 User Guide
210