Specifications - Roland CAMM-1 User Manual

9 Specifications

Mechanism
Driving method
Maximum cutting area
Acceptable media widths
Acceptable paper widths
Acceptable paper types
Tools
Max. cutting speed
Blade force
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Interface
Buffer size
Instruction system
Switches
Control switches
LED
Power consumption
Acoustic noise level
Dimensions
Weight
Operating temperature
Operating humidity
Accessories
PNC-960
Width:584 mm (23")
Length:24,998 mm (984-1/8")
50 mm—711 mm (1-15/16"—28")
50 mm—711 mm (1-15/16"—28")
Cutters: Special cutter for CAMM-1 series
Pens: Water-based fiber-tipped pens, Thick water-based fiber-tipped pens (options) and
(When DIP switch SW-8 is at ON:100 mm/sec.)
Error of less than +/- 0.2% of distance travelled, or 0.1mm, whichever is grater
0.1 mm or less (Excluding stretching/contraction of the sheet, and provided that sheet length is under
Parallel (Centronics compatible), Serial (RS-232C)
2 Kbytes (expandable up to 2 Mbytes)
Power switch, Pen force slider, DIP switches
SETUP, PAUSE, PEN MODE, ROTATE, TEST, ORIGIN SET,
POWER/ERROR LED, SETUP LED, PAUSE LED, PEN MODE LED, ROTATE LED,
0.6 A /117 V, 0.35 A / 220 - 230 V, 0.35 A / 230 - 240 V
[Cutting mode]:less than 68 dB (A)
[Standby mode]:less than 40 dB (A)
(According to ISO 7779)
840 mm (W) x 278 mm (D) x 221 mm (H)
(33-1/8" (W) x 11" (D) x 8-3/4" (H))
16 kg (35.3 lb.)
Power Cord x 1, Blade (ZEC-1005) x 1, Blade Holder (XD-CH3) x 1, Test-use High-quality Paper x 1,
Material for Test Cuts x 1, Test-use Application Tape x 1, Test-use Water-based Fiber-tipped Pen x 1,
User's Manual x 1, CAMM-1 DRIVER for windows 95 x 1,
CAMM-1 DRIVER for windows 3.1 x 1
* Roller base x 1, * Cutter Tool x 1, * Tweezers x 1,
Media-movement method
Stepping motor (Micro-step)
Length:24,998 mm (984-1/8")
50 mm—406 mm (1-15/16"—16")
50 mm—406 mm (1-15/16"—16")
High-quality paper
32 color plotter pens (options)
During cutting: 400 mm/sec.
30 gf—200 gf
0.05 mm/step
0.025 mm/step
1600 mm (63"))
CAMM-GLIII (mode1 and mode2)
TEST LED
[Cutting mode]:less than 65 dB (A)
[Standby mode]:less than 40 dB (A)
(According to ISO 7779)
535 mm (W) x 278 mm (D) x 221 mm (H)
(21-1/8" (W) x 11" (D) x 8-3/4" (H))
5—40°C (41—104°F)
35%—80% (non-condensing)
9 Specifications
PNC-910
Width:280 mm (11")
, , ,
10 kg (22 lb.)
*.....PNC-960 only
21