Appendix 3 Specifications - Roland Camm-1 PNC-1850 User Manual

Appendix 3 SPECIFICATIONS

Mechanism
Driving method
Maximum cutting area
Acceptable sheet widths
Acceptable paper widths
Acceptable paper types
Number of tools
Tools
Max. cutting speed
Cutting speed
Blade force
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Interface
Buffer size
Instruction system
Switches
Control switches
LED
Display
Power consumption
Acoustic noise level
Dimensions
(1540 mm (W) x 640 mm (D) x 1150 mm (H)
(60-11/16" (W) x 25-1/4" (D) x 45-5/16" (H)) (with stand))
Weight
Temperature
Humidity
( ) However, a sheet (paper) with a width of 50 mm (1-15/16") to 762 mm (30") can be loaded only if it is a flat sheet (paper) or a
*
rolled sheet (paper) with a sheet base. When using a stand (PNS-121), a rolled sheet (paper) with a width in the range of 50 mm
(1-15/16") to 610 mm (24") can be loaded.
( )
** The following conditions must be satisfied:
- Sheet type: 3M Scotchcal Mastercut Film, ARLON Series 2100
- Special stand (a roll sheet must be set at the rear and on the inner sheet hanger)
- Side margins: 25 mm (1") or more for both the left and right margins
- Front margin: 25 mm (1") or more
(After loading the sheet, using the display menu to select "EDGE" as the sheet type automatically sets a front margin of 25 mm (1").)
- Use of the display menu's "AREA" function to perform feed of the sheet length plus 0.2 m and set the sheet correctly
- Cutting of the following data one time
Side margins: 25 mm (1") or more
Front margin: 25 mm (1") or more
Movable
pinch roller (left)
Movable pinch roller (right)
P N C - 1 8 5 0
Width: 1195 mm (47")
Length: 24998 mm (984-1/8")
50 mm—1220 mm (1-15/16"—48")
50 mm—1220 mm (1-15/16"—48")
Cutters: special cutter for CAMM-1 series
Pens: Water-based fiber-tipped pens, Thick water-based fiber-tipped pens (options) and
During cutting: 850 mm/sec. (in all directions)
During tool-up: 1202 mm/sec. (in 45° direction)
10 mm/sec—850 mm/sec (in increments of 10 mm/sec.)
30 gf—500 gf (in increments of 10 gf)
0.005 mm/step (Minimum controllable resolution: 0.005 mm x 5 step = 0.025 mm/step)
Error of less than +/- 0.2% of distance travelled, or 0.1mm, whichever is grater
0.1 mm or less (excluding stretching/contraction of the sheet)
• Range for assured repetition accuracy (**)
For sheets with a width exceeding 610 mm (24"): Length 4,000 mm (157-7/16") (PNC-1850 only)
For sheets with a width of 610 mm (24") or less : Length 8,000 mm (315-15/16")
Parallel (Centronics compatible), Serial (RS-232C)
1 Mbyte (Expandable up to 3 Mbyte)
ENTER
Liquid crystal display unit; 16-chracter by 2 lines
1.1A/117V, 0.5A/220-230V, 0.5A/240V
Cutting mode: under 62dB (A)
1540 mm (W) x 300 mm (D) x 285 mm (H)
(60-11/16" (W) x 11-13/16" (D) x 11-1/4" (H))
36.5 kg (80.5 lb.)
(59 kg (130.1 lb.) (with stand))
(1) The letters are cut in order starting with "R"
(2) After the last letter ("P") has been cut, the machine returns to the origin
Cutter
protector
Origin
Y
Side margins:
Feed length
X
25 mm (1")
Sheets with a width exceeding 610 mm (24"): 4,000 mm (157-7/16")
or more
Sheets with a width of 610 mm (24") or less : 8,000 mm (315-15/16")
The origin is rotated 90 degrees ("AXIS" on the display menu is set to "90deg").
Media-movement method
Digital control servo motor
Width: 585 mm (23")
Length: 24998 mm (984-1/8")
50 mm—762 mm (1-15/16"—30") (*)
50 mm—762 mm (1-15/16"—30") (*)
High-quality paper
1
32 color plotter pens (options)
0.025 mm/step
CAMM-GL III (mode1 and mode2)
Power switch
, , , , , , ,
MENU TEST PAUSE
POWER LED, PAUSE LED
Standby mode: under 40dB (A)
(According to ISO 7779)
945 mm (W) x 300 mm (D) x 295 mm (H)
(37-1/4" (W) x 11-13/16" (D) x 11-5/8" (H))
(945 mm (W) x 640 mm (D) x 1132 mm (H)
(37-1/4" (W) x 25-1/4" (D) x 44-5/8" (H)) (with stand))
(43.5 kg (95.9 lb.) (with stand))
5—40°C (41—104°F)
35%—80% (non-condensing)
point and the outer border is cut
P N C - 1 2 0 0
25 kg (55.1 lb.)
Cut length
Fills the
hard clip
45