Specifications Of Pnc-900; Hardware Specifications - Roland PNC-900 Camm-1 User Manual

11 SPECIFICATIONS OF PNC-900

Mechanism
Acceptable sheet widths
Maximum cutting area
Acceptable paper widths
Acceptable paper types
Tools
Cutting speed
Blade force
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Interface
Buffer size
Instruction system
Switches
Control switches
LED
Power consumption
Acoustic noise level
Dimensions
Weight
Operating temperature
Operating humidity
Media-movement method
50 mm ~ 305 mm (1-15/16" ~ 12")
Width: 280 mm (11")
Length: 24998 mm (984-1/8") (Accuracy assured up to 1600 mm (62-15/16"))
50 mm ~ 305 mm (1-15/16" ~ 12")
High-quality paper
Cutters: carbide
Pens: Water-based fiber-tipped pens, Thick water-based fiber-tipped pens (options) and 32 color plotter
pens (options)
10 mm/sec ~ 200 mm/sec (When DIP switch SW-8 is at ON: 10 mm/sec - 100 mm/sec)
30 gf ~ 200 gf
0.05 mm/step
0.025 mm/step
Error of less than +/- 0.2% of distance travelled, or 0.1mm, whichever is grater
0.1 mm or less (Excluding stretching/contraction of the sheet,
and provided that sheet length is under 1600 mm (62-15/16"))
Parallel (Centronics compatible)
Serial (RS-232C)
2K byte
CAMM-GLIII (mode1and mode2)
Power switch, pen force slider, DIP switches
SETUP, PAUSE, PEN MODE, ROTATE, TEST, ORIGIN SET,
POWER/ERROR LED, SETUP LED, PAUSE LED, PEN MODE LED, ROTATE LED
0.5 A /117 V, 0.3 A / 220 - 230 V, 0.3 A / 240 V
[Cutting mode] When DIP switch SW-8 is at OFF: under 63 dB (A)
When DIP switch SW-8 is at ON: under 70 dB (A)
[Standby mode] under 40 dB (A)
492 mm (W) x 289 mm (D) x 217 mm (H) (19-3/8" (W) x 11-7/16" (D) x 8-9/16" (H))
8.7 kg (19.2 lb.)
5 ~ 40 C
35% ~ 80% (non-condensing)
, , ,
(according to ISO 7779)
23