56
1-3. Charging with the EV system
How to use DC charging
This section explains the DC
charging procedure for the trac-
tion battery.
When using a DC charger, make
sure to check the operation
instructions of the DC charger.
WARNING
■
When using a DC charger
Observe the following precautions.
Failure to do so may cause an unex-
pected accident, resulting in death or
serious injury.
Use a SAE J 1772 compliant DC char-
●
ger.
Do not use the charging cable longer
●
than 30 meters.
Confirm the following before
charging
P.47
When charging
1
Open the charging port lid.
(P.32)
The charging inlet light will illuminate.
2
Open the DC charging inlet cap.
3
Insert DC charging connector
firmly and fully into the charging
inlet
Insert the DC charging connector and it
will lock automatically.
The DC charging connector shape and
treatment will differ depending on the type
of DC charger. Perform the operations in
accordance to handling procedures of the
DC charger.
4
Operate the DC charger and start
the charging.
Follow the handling procedures of the DC
charger to start charging.
Charging starts after a system check is
done.
Stop the charging in accordance to the
handling procedures of the DC charger
when it is desired to interrupt the DC
charging.
When connecting the DC charging
■
connector
If the door is opened or the power switch is