Vehicles with auto anti-glare inside
rear view mirror
Vehicles with Digital Rearview Mir-
ror
3
Program a device.
Vehicles with auto anti-glare inside
rear view mirror
2-3. Parking the vehicle
Vehicles with Digital Rearview Mir-
ror
Programming a device other than
an entry gate (for U.S.A. owners):
Press and hold the remote control trans-
mitter button until the HomeLink
tor light changes from slowly flashing
orange to rapidly flashing green (rolling
code) or continuously lit green (fixed
code), then release the button.
Programming an entry gate (for
U.S.A. owners)/Programming a
device in the Canadian market:
Press and release the remote control trans-
mitter button at 2 second intervals, repeat-
®
edly, until the HomeLink
changes from slowly flashing (orange) to
rapidly flashing (green) (rolling code) or
continuously lit (green) (fixed code).
®
4
Test the HomeLink
pressing the newly programmed
button and observing the indicator
light:
®
HomeLink
indicator light illumi-
nates: Programming of a fixed code
device has completed. The garage
door or other device should operate
®
when a HomeLink
pressed and released.
®
HomeLink
indicator light flashes
159
2
®
indica-
indicator light
operation by
button is