Table of Contents
Advertisement
5
Insert the charging connector into
the AC charging inlet.
Align the guide position on the bottom of
the charging connector, and push the
charging connector straight into the AC
charging inlet as far as possible. Once a
click sound is heard, check that the
charging connector is securely locked.
When the charging connector is inserted
straight as far as possible, it will automati-
cally lock. (P.39)
6
Confirm that the charging indicator
of the charging port is illuminated.
Charging will not start if the charging indi-
cator does not illuminate when the
charging connector is inserted. (P.535)
If the charging indicator is flashing, the
charging schedule is registered. (P.51)
If the error warning indicator on the CCID
(Charging Circuit Interrupting Device)
flashes during charging, check P.541and
follow the correction procedure.
The charging indicator will turn off when
charging is completed.
The charging indicator will also turn off
when charging is interrupted. In this case,
1-3. Charging with the EV system
refer to P.534
■
When connecting the AC charging con-
nector
If the door is opened or the power switch is
turned to ON with the AC charging con-
nector connected, the charging cable indi-
cator turns on to notify that the AC
charging connector is connected.
If the charging indicator of the charging
■
port flashes after connecting the AC
charging cable
The charging schedule (P.60) is regis-
tered and charging cannot be performed.
To cancel charging using the charging
schedule and start charging, perform any of
the following procedures.
Turn "Charge Now" on (P.63, 64)
●
●
While the charging indicator is flashing,
remove and reconnect the charging con-
nector immediately
When the charging connector cannot
■
be inserted into the AC charging inlet
P.40
Safety function
■
If the latch release button is pressed,
charging will not begin even if the AC
charging cable is connected.
Also, charging will be stopped if the latch
51
1
Advertisement
Table of Contents
