Lexus RZ450E 2023 Owner's Manual page 158

158
2-3. Parking the vehicle
WARNING
Do not use the HomeLink
transceiver with any garage door opener
or device that lacks safety stop and
reverse features as required by federal
safety standards. This includes any
garage door that cannot detect an inter-
fering object. A door or device without
these features increases the risk of death
or serious injury.
Codes stored in the HomeLink
■
ory
The registered codes are not erased even
●
if the 12-volt battery cable is discon-
nected.
● If learning fails when registering a code to
a previously registered HomeLink
ton, the registered code will not be
erased.
Program the HomeLink
Before programming the HomeLink
perform the following:
 During programming, it is possible
that garage doors, gates, or other
devices may operate. For this rea-
son, make sure that people and
objects are clear of the garage door
or other devices to prevent injury or
other potential harm.
 It is recommended that a new bat-
tery be placed in the remote control
transmitter for more accurate pro-
gramming.
The battery side of the transmitter must be
pointed away from the HomeLink
tons.
 Garage door opener motors manu-
factured after 1995 may be
equipped with rolling code protec-
tion. If this is the case, you may need
®
compatible
a stepladder or other sturdy, safe
device to reach the "learn" or
"smart" button on the garage door
opener motor.
● The garage door or other device may
operate, so ensure people and objects
are out of danger to prevent potential
®
harm.
mem-
Never allow a child to operate or play
●
with the HomeLink
Steps
within 60 seconds, otherwise the
®
but-
HomeLink
flashing and programming will not be
successfully completed.
®
1
Press and release the HomeLink
button you want to program and
®
,
check that the HomeLink
tor light flashes orange.
2 Point the remote control transmit-
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
Keep the HomeLink
view while programming.
®
but-
WARNING
®
buttons.
1 through 3 must be performed
®
indicator light will stop
®
®
buttons.
®
indicator light in
®
indica-