Table of Contents
Advertisement
118
1-7. Loading luggage
tection function, etc., while the back
door is automatically closing after a
reserve lock operation is per-
formed, the reserve lock function is
canceled and all the doors will
unlock.
Before leaving the vehicle, make
sure that all the doors are closed
and locked.
Adjusting the open position of the
back door (vehicles with the
power back door)
The open position of the power back
door can be adjusted.
1
Stop the back door in the desirable
position.
2
Press and hold the
on the lower part of the back door
for approximately 2 seconds.
When the settings are completed, the
buzzer sounds 4 times.
When opening the back door the next
time, the back door will stop at that
position.
Canceling the adjusted open posi-
tion of the back door
Press and hold the
the lower part of the back door for
approximately 7 seconds.
After the buzzer sounds 4 times, it
sounds twice more.
When the power back door does the
opening operation the next time, the
door will open to the initial settings
position.
Rear seat seatbacks
Folding the seat backs can be done
with the lever operations.
WARNING
When operating the rear seatback
■
Observe the following precautions.
Do not operate the rear seat if it is
●
occupied.
●
After adjusting the seat, make sure that
the seat is locked in position. If the
seatback is not securely locked, the
red marking will be visible. Make sure
that the red marking is not visible.
switch
■
When a rear seatback is folded
Observe the following precautions.
Do not fold down the rear seatbacks
●
while driving.
●
Stop the vehicle on level ground, apply
the parking brake and change the shift
position to P.
●
Do not allow anyone to sit on a folded
switch on
rear seatback or in the luggage com-
partment while driving.
●
Do not allow children to enter the lug-
gage compartment.
After adjusting the rear seats
■
Observe the following precautions.
Advertisement
Table of Contents
