Table of Contents
Advertisement
5
Remove the valve cap from the
valve of the flat tire.
6
Extend the hose. Remove the air
release cap from the hose.
The air release cap may be used later.
Therefore keep it in a safe place.
7
Connect the hose to the valve of
the flat tire.
Screw the end of hose clockwise as far as
possible.
WARNING
Check the following.
9-4. If a tire is flat
●
Make sure that the valve and hose are
securely connected, with the tire
installed on the vehicle.
If the hose is not properly connected to
●
the valve, air leakage may occur or
sealant may be sprayed out.
If the hose comes off the valve while
●
inflating the tire, there is a risk that the
hose will move abruptly due to air
pressure.
8
Make sure that the compressor
switch is off.
9
Connect the power plug to the
power outlet socket. (P.224)
517
9
Advertisement
Table of Contents
