Table of Contents
Advertisement
252
5-2. Functions of the displays
If the steering wheel switches do not
■
respond when touched (vehicles with a
head-up display)
●
It is easier to make the steering wheel
switches respond by moving your thumb
while touching them.
●
If the surface of a steering wheel switch is
dirty, turn the power switch off and then
clean the switches.
By turning winter glove mode on, the sen-
●
sitivity of the switch sensors can be
increased. (P.583)
■
Customization
Some functions can be customized.
(P.583)
Switching the display of the
multi-information display (vehi-
cles without a head-up display)
1
Press
or
of the meter con-
trol switch.
Switching driving information (vehi-
cles without a head-up display)
1
Press the
or
switch to select
or
.
Switching the display of the
multi-information display (vehi-
cles with a head-up display)
1
Select
on the center display.
2
Select "Vehicle customize".
3
Select "Meter".
4
Select
or
of "Display
switching".
The display changes each time the switch is
selected.
■
Switching with the steering wheel
switches
If
steering wheel switch function, the display
can be switched by pushing
Display of drive information
Driving related information is dis-
played on the following displays.
Multi-information display
Head-up display (if equipped)
Center display
The items displayed will differ depend-
ing on the display.
The following items can be displayed
on the multi-information display.
meter control
Use the displayed values as a refer-
. Then press
ence only.
Current electricity consumption
Displays the instantaneous current elec-
tricity consumption.
Average electricity consumption
Electricity consumption
■
For U.S.A.
●
Electricity consumption is the consumption
rate of the electricity and equivalent to the
fuel consumption for the gasoline vehicles.
For this vehicle, driven distance per kWh of
electricity consumed ("miles/kWh") is dis-
played as electricity consumption on each
/
is set as a favorite
.
Drive information 1
or
Advertisement
Table of Contents
