My Settings - Lexus RZ450E 2023 Owner's Manual

Table of Contents

Advertisement

196
4-1. Favorite settings
*
4-1.Favorite settings

My Settings

*
: If equipped
By identifying an individual through
a device, such as an electronic key,
the driving position and vehicle set-
tings recorded for that driver can
be recalled when the vehicle is
entered.
By assigning an authentication
device to a driver in advance, the
driver can enter the vehicle with
their preferred settings.
Settings for up to 3 drivers can be
recorded by My Settings.
For details on how to assign/delete
electronic keys, set driver names,
perform initialization, change driv-
ers manually, or delete a driver,
refer to the "MULTIMEDIA
OWNER'S MANUAL".
Types of assigned authentication
devices
An individual can be identified using
the following authentication devices:
 Electronic key/Digital key
An individual is identified when the smart
access system with push-button start
detects their electronic key/digital key.
(P.84, 88)
 Face authentication system
An individual is identified at the open-
ing/closing of the door when face informa-
tion registered using the driver monitor
camera is identified. (P.276)
Individual identification by face authentica-
tion is prioritized than by electronic
key/digital key
with another registered driver.
 Bluetooth
An individual can be identified if the same
®
Bluetooth
hands-free phone the last time the vehicle
was entered is connected to the audio sys-
tem.
If an individual is identified by detecting an
electronic key, identification by Bluetooth
device will not be performed.
*
: If equipped
Recalled functions
When an individual is identified from
an authentication device, settings for
the following functions are recalled:
 Driving position (memory recall
function)
After an individual is identified, the driving
position that was set when driving was last
completed (with shift position set to P) is
recalled when the following operation is
performed.
• When an individual is identified from an
electronic key: Unlocking the doors
*
using the smart access system with
push-button start or wireless remote
control
• When an individual is identified from a
digital key
*
the smart access system with push-but-
ton start
• When an individual is identified from the
face authentication system
driver monitor identifies face informa-
*
, if the latter has identified
®
devices
device that was used as a
*1
*1
: Unlocking the doors using
*1
: After the
®

Advertisement

Table of Contents
loading

Table of Contents