Driving Position Registra- Tion/Recall/Deletion - Lexus RZ450E 2023 Owner's Manual

Driving position registra-
tion/recall/deletion
*
: If equipped
This feature automatically adjusts
the positions of the driver's seat,
steering wheel, outside rear view
mirrors and head-up display (if
equipped) to make entering and
exiting the vehicle easier or to suit
your preferences.
Vehicle with the My Settings:
Up to 3 different driving positions
can be recorded for each the driver
and guest that have been regis-
tered for My Settings. When elec-
tronic key (including a card key)
assignment is registered for My
Settings, the driving position for
each driver can be recalled (mem-
ory recall function).
Vehicle without the My Settings:
Up to 3 different driving positions
can be recorded.
Registering a driving position
into memory (position memory
function)
1
Check that the shift position is in P.
2
Turn the power switch to ON.
3 Adjust the driver's seat, steering
wheel, outside rear view mirrors
and head-up display (if equipped)
to the desired positions.
4 While pressing the "SET" button, or
within 3 seconds after the "SET"
4-2. Adjusting the preferred driving position
button is pressed, press button "1",
"2" or "3" until the buzzer sounds.
*
If a driving position has already been regis-
tered to the selected button, the previously
registered position will be overwritten.
■ Seat positions that can be memorized
The adjusted positions other than the posi-
tion adjusted by lumbar support switch can
be recorded.
In order to correctly use the driving
■
position memory function
If a seat position is already in the furthest
possible position and the seat is operated in
the same direction, the registered position
may be slightly different when it is recalled.
Take care during seat adjustment so that
the seat does not contact a rear passen-
ger or squeeze your body against the
steering wheel.
Recalling a driving position
(position memory function)
Never use any part of your body to inten-
tionally activate the jam protection func-
tion.
1
Check that the shift position is in P.
2 Turn the power switch to ON.
WARNING
WARNING
199
4