Table of Contents
Advertisement
Type A
Normal fuse
A
Blown fuse
B
Type B
Normal fuse
A
Blown fuse
B
Type C
Normal fuse
A
Blown fuse
B
After a fuse is replaced
■
When installing the lid, make sure to
●
9-10. Items to check before contacting a dealership
engage the claw securely.
●
If the lights do not turn on even after the
fuse has been replaced, a bulb may need
replacement.
●
If the replaced fuse blows again, have the
vehicle inspected by your Lexus dealer.
If there is an overload in a circuit
■
The fuses are designed to blow, protecting
the wiring harness from damage.
When replacing light bulbs
■
Lexus recommends that you use genuine
Lexus products designed for this vehicle.
Because certain bulbs are connected to cir-
cuits designed to prevent overload,
non-genuine parts or parts not designed for
this vehicle may be unusable.
Light bulbs
If any lights burn out, have it replaced
by your Lexus dealer.
LED Lights
■
The lights consist of a number of LEDs. If
any of the LEDs burn out, take your vehicle
to your Lexus dealer to have the light
replaced.
Condensation build-up on the inside of
■
the lens
Temporary condensation build-up on the
inside of the headlight lens does not indi-
cate a malfunction. Contact your Lexus
dealer for more information in the following
situations:
●
Large drops of water have built up on the
inside of the lens.
Water has built up inside the headlight.
●
561
9
Advertisement
Table of Contents
