Table of Contents
Advertisement
518
9-4. If a tire is flat
10
Attach the sticker provided with the
tire puncture repair kit to a position
easily seen from the driver's seat.
U.S.A.
A
Canada
B
WARNING
Do not attach the vehicle speed warning
sticker to an area other than the one indi-
cated. If the sticker is attached to an area
where an SRS airbag is located, such as
the pad of the steering wheel, it may pre-
vent the SRS airbag from operating
properly.
11
Check the specified tire inflation
pressure.
Tire inflation pressure is specified on the
label as shown. (P.564)
12
Start the EV system. (P.138)
13
To inject the sealant and inflate the
tire, turn the compressor switch on.
WARNING
Observe the following precautions.
●
Keep back from the tire while it is
being repaired, as there is a chance of
it bursting while the repair operation is
being performed. If you notice any
cracks or deformation in the tire, turn
off the compressor switch and stop the
repair operation immediately.
Do not operate the compressor con-
●
tinuously for more than 40 minutes.
The kit may overheat if operated for a
long period of time.
Parts of the emergency tire puncture
●
repair kit become hot during opera-
tion. Be careful when handling it during
and after operation.
●
Do not touch the metal connecting
parts of the bottle and compressor
while being used or immediately after,
as they will be extremely hot.
Advertisement
Table of Contents
