Table of Contents
Advertisement
6
Remove the uppermost wheel bolt
and install the guide pin
hand.
Turn the guide pin clockwise to tighten it
until it stops.
WARNING
When removing or installing a tire, make
sure to use the guide pin.
Also, the guide pin is made of resin. It
may be damaged if the wheel is placed
anywhere other than
amount of force is applied to the guide
pin.
7
Remove the remaining wheel bolts
and the tire.
When resting the tire on the ground, place
the tire so that the wheel design faces up,
to avoid scratching the wheel surface.
by
Installing the tire
1
Remove any dirt or foreign matter
from the wheel contact surfaces
and wheel bolts.
If foreign matter is not removed, the wheel
bolts may loosen while the vehicle is in
motion, and the wheel may come off.
or if a large
2
Align a wheel bolt hole on the tire
with the guide pin, and set the tire
on the guide pin.
Align the center hole of the wheel with the
center of the hub and securely set the tire
so that the wheel and hub contact surfaces
8-5. Tire maintenance
463
8
Advertisement
Table of Contents
