Table of Contents
Advertisement
212
4-3. Adjusting the temperature/environment inside the vehicle
NOTICE
To prevent damage to the seat heat-
■
ers/radiant heaters
Do not put heavy objects that have an
uneven surface on the seat and do not
stick sharp objects (needles, nails, etc.)
into the seat.
■
To prevent 12-volt battery discharge
Do not use the functions when the EV
system is off.
■
Operating conditions of seat heaters
The power switch is in ON
Operating conditions of radiant heaters
■
The power switch is in ON and seat belt is
fastened.
Turn the front seat heaters/radi-
ant heaters ON/OFF
Vehicles without radiant heaters:
Select
or
on the center display.
Vehicles with radiant heaters: Select
or
on the center display.
Each time the switch is selected, the
operation condition changes as fol-
lows.
AUTO Hi (3 segments lit) Mid
(2 segments lit) Lo (1 segment lit)
Off
The level indicator (red) lights up
during operation. AUTO indicator
lights up during automatic operation.
The radiant heater can be used when
■
●
The power may be turned off automati-
cally be continually touching the heater
section. In that case, turn the radiant
heater switch on the center display again.
It may take some time for the heater tem-
●
perature to rise.
■
Position of the radiant heaters
Front passenger's side radiant heater
A
Driver's side radiant heater
B
Customization
■
The temperature setting of the seat heaters
of the front seats can be set through "Vehi-
cle customize" on the center display.
(P.595)
Turns the rear seat heaters on/off
(if equipped)
Press the switch.
Each time the switch is pressed, the
operation condition changes as fol-
lows.
Hi (3 segments lit) Mid (2 segments
Advertisement
Table of Contents
