Table of Contents
Advertisement
Charging indicator of the charging port does not illuminate, even
though AC charging connector is connected
Cause
The plug is not properly connected
to the socket
AC charging connector is not
securely connected to AC charging
inlet
Traction battery is already fully
charged
The remaining charge of the traction
battery exceeds the set upper limit of
the charge capacity
The charger does not operate
9-6. If the EV system cannot be used normally
Check that the plug is properly connected to the
socket.
Check the connection status of the AC charging
connector.
When connecting the AC charging connector,
make sure not to touch the latch release button.
Insert the charging connector securely until you
hear a click. The charging connector may not be
connected correctly if the latch release button is
pressed while inserting.
After connecting the AC charging connector,
check that the latch release button is not pressed
and the charging indicator of the charging port is
turned on.
If the charging indicator of the charging port does
not illuminate, even though the charging connector
is securely connected, there may be a malfunction in
the system. Immediately stop charging and contact
your Lexus dealer.
When the traction battery is fully charged, AC
charging is not performed.
Change to a higher upper limit setting than the cur-
rent remaining charge capacity and perform
charging again. (P.52)
Please contact the facility manager when there is a
problem with charger.
Remedy
535
9
Advertisement
Table of Contents
