Table of Contents
Advertisement
at set times" and the start time and stop time
are set to the same time, charging will be
performed for 24 hours from the start time.
The charging schedule function cannot be
used when using DC charging.
To make sure that the charging schedule
■
function operates correctly
Check the following items.
●
Adjust the clock to the correct time
The calendar is set to the correct date
●
●
Check that the power switch is turned off
●
After registering the charging schedule,
connect the AC charging connector
The charging start time is determined
based on the charging schedule at the time
that the AC charging connector was con-
nected.
●
Connect the AC charging connector
before the start time
When the charging mode is set to "Start at
set time", if you connect the AC charging
connector after the set start time, the next
charging schedule will be referenced.
When the charging mode is "Start and stop
at set times", if you connect the AC
charging connector after the start time,
charging will start immediately and
charging will be performed until the stop
time.
●
After connecting the AC charging con-
nector, check that the charging indicator
of the charging port flashes (P.49)
Do not use an socket that has a power cut
●
off function (including a timer function)
Use an socket that constantly supplies
electricity. For sockets where the power is
cut off due to a timer function, etc.,
charging may not be carried out according
to plan if the power is cut off during the set
time.
*
: For the setting procedure for the clock
and calendar, refer to "MULTIMEDIA
OWNER'S MANUAL".
1-3. Charging with the EV system
When the AC charging connector
■
remains connected to the vehicle
●
When the charging mode is set to "Start
at set time", even if multiple consecutive
charging schedules are registered, the
next charge will not be carried out
according to the charging schedule until
the AC charging connector is removed
and reconnected after charging com-
pletes. Also, when the traction battery is
*
fully charged, charging according to the
*
charging schedule will not be carried out.
If the charging stop time is reached
●
before the traction battery is fully
charged and the charging mode is set to
"Start and stop at set times", the nearest
charging schedule after the stop time is
updated as the next charging schedule,
and charging is repeated until the battery
is fully charged.
■
Smartphone-linked operation
It may be necessary to use a smartphone
with a dedicated app to change the
charging settings.
When charging schedules are ignored
■
When the following operations are per-
formed while the charging schedule is on
standby, charging schedule is temporarily
canceled and charging is started.
When turning My Room Mode on
●
(P.65)
●
When turning "Charge Now" on
(P.63, 64)
When an operation that temporarily can-
●
cel charging using the charging schedule
(P.51)
Battery heater (P.43)/Battery
■
Cooler (P.43)
Depending on the temperature of the trac-
tion battery, the traction battery heater or
traction battery cooler may be activated
and the charging indicator may light up
while the timer is waiting for charging.
Setting operations on center dis-
play
Setting operations related to the
61
1
Advertisement
Table of Contents
