Table of Contents
Advertisement
272
6-1. Features of the safe driving support functions
WARNING
• Even if a glass coating agent is applied
to the windshield, it will still be neces-
sary to use the windshield wipers to
remove water droplets, etc. from the
area of the windshield in front of the
front camera.
• If the inner side of the windshield
where the front camera is installed is
dirty, contact your Lexus dealer.
●
Do not attach stickers (including trans-
parent stickers) or other items to the
area of the windshield in front of the
front camera (shaded area in the illus-
tration).
Approximately 1.6 in. (4cm)
A
Approximately 1.6 in. (4cm)
B
●
If the part of the windshield in front of
the front camera is fogged up or cov-
ered with condensation or ice, use the
windshield defogger to remove the
fog, condensation, or ice.
If water droplets cannot be properly
●
removed from the area of the wind-
shield in front of the front camera by
the windshield wipers, replace the
wiper insert or wiper blade.
Do not attach window tint to the wind-
●
shield.
●
Replace the windshield if it is damaged
or cracked.
If the windshield has been replaced,
recalibration of the front camera will be
necessary.
For details, contact your Lexus dealer.
●
Do not allow liquids to contact the
front camera.
Do not allow bright lights to shine into
●
the front camera.
Do not damage the lens of the front
●
camera or allow it to become dirty.
When cleaning the inside of the wind-
shield, do not allow glass cleaner to con-
tact the lens of the front camera. Do not
touch the lens of the front camera.
If the lens of the front camera is dirty or
damaged, contact your Lexus dealer.
●
Do not subject the front camera to a
strong impact.
●
Do not change the position or orienta-
tion of the front camera or remove it.
Do not disassemble the front camera.
●
Do not modify any parts around the
●
front camera, such as the inside rear
view mirror or ceiling.
●
Do not attach accessories which may
obstruct the front camera to the hood,
front grille, or front bumper.
For details, contact your Lexus dealer.
If a surfboard or other long object is to
●
be mounted on the roof, make sure
that it will not obstruct the front cam-
era.
Do not modify or change the head-
●
lights and other lights.
■
Front camera installation area on the
windshield
If the system determines that the wind-
shield may be fogged up, it will automati-
cally operate the heater to defog the part
of the windshield around the front cam-
era. When cleaning, etc., be careful not
to touch the area around the front cam-
era until the windshield has cooled suffi-
ciently, as touching it may cause burns.
Advertisement
Table of Contents
