If Dc Charging Cannot Be Performed Normally - Lexus RZ450E 2023 Owner's Manual

If DC charging cannot be performed normally

DC charging does not start
Cause
The DC charging connector is not properly
connected to the vehicle.
The DC charging connector is not securely
locked.
Error is detected by the DC charger or vehi-
cle's system check.
The DC charger power goes off.
Traction battery is already fully charged
The remaining charge of the traction battery
exceeds the set upper limit of the charge
capacity
9-6. If the EV system cannot be used normally
Check the connection status of the DC
charging connector and be sure that it is
locked.
If the DC charging does not start, even
though the DC charging connector is
securely connected, there may be a mal-
function with the DC charger or charging
system.
 If there is a malfunction with the DC char-
ger, contact the charging station manager.
 If there is not a malfunction with the DC
charger, there may be a malfunction in the
system. Contact your Lexus dealer.
There may be a malfunction with the DC
charger or charging system.
 If there is a malfunction with the DC char-
ger, contact the facility manager.
 If there is not a malfunction with the DC
charger, there may be a malfunction in the
system. Contact your Lexus dealer.
 If the EV system cannot be started, con-
tact your Lexus dealer.
Contact the charging station manager and
check the power status.
When the traction battery is fully charged,
DC charging cannot be performed.
Change to a higher upper limit setting than
the current remaining charge capacity and
perform charging again. (P.52)
537
Remedy
9