Table of Contents
Advertisement
a kick operation again.
Kick sensor
A
Hands Free Power Back Door
B
operation detection area
3
When the kick sensor detects that
your foot is pulled back, a different
buzzer than the normal one will
sound and the Hands Free close &
lock (Walk-Away) function will go
into standby.
4
While the buzzer is sounding, move
away from the back door.
When the sensor detects that you are away
from the back door, the emergency flash-
ers will flash, and the buzzer will sound.
Depending on the direction of moving
away from the back door, the location and
how to hold the electronic key or circum-
stances, it may not be detected properly.
All the doors other than the back door will
be locked, and after the back door is
closed, the back door will also be locked.
When all the doors have been closed and
locked, the buzzer will sound and the
emergency flashers will flash.
The standby state is canceled if you do not
move away from the back door for 30 sec-
onds. To operate the function again, per-
form the procedure again from the
beginning.
If you approach the back door carrying the
electronic key, the back door operation will
stop, all the doors will be unlocked, and the
buzzer will sound and the emergency
flashers will flash.
1-7. Loading luggage
If the power back door is operated after
the back door operation has stopped, the
Hands Free close & lock (Walk-Away)
function will go into standby again.
Back door reserve lock function
(vehicles with the power back
door)
This function reserves the locking of
the power back door when the power
back door is open.
Reserves the locking of the all the
doors
If the following operations are per-
formed, all of the doors except the
power back door will lock and then the
power back door will lock when it is
completely closed.
1
Close all of the doors, except the
power back door.
2
Perform an automatic closing oper-
ation of the power back door and
lock the doors using the wireless
remote control (P.109) or smart
access system with push-button
start (P.108) while the power
back door is closing.
Operation signals will indicate that all
the doors have been closed and
locked.
If the electronic key is placed inside
the vehicle after starting a close
operation via the door reserve lock
function, the electronic key may
become locked inside the vehicle.
If the back door does not fully close
due to the operation of the jam pro-
117
1
Advertisement
Table of Contents
