Table of Contents
Advertisement
392
6-2. Using the safe driving support functions
son, or gutter: P.383
7
Perform operations as indicated by
the advice displays until the vehicle
stops in the target parking space.
8
Check the position that the vehicle
has stopped. If necessary, adjust the
position of the parking spot to be
registered using the arrow buttons,
and then select "Reg." button.
"Registration Completed" will be displayed
on the center display.
Register the parking space only if
there are no obstructions within the
area shown by the thick lines.
The amount that the position of the
parking spot to be registered can be
adjusted is limited.
When parking in a parking space
registered to the memory func-
tion
1
Stop the vehicle with it aligned near
the center of the target parking
space.
Approximately 3.3 ft. (1 m)
A
2
Press the Advanced Park main
switch and check that a possible
parking space is displayed on the
center display.
If the "MODE" button is displayed, the but-
ton can be touched to change between the
memory function, perpendicular parking
(forward/reverse) function and parallel
Advertisement
Table of Contents
