Table of Contents
Advertisement
356
6-2. Using the safe driving support functions
cameras. Therefore, after the power
switch is changed to ON, even if an
object is along the side of the vehicle, it
may not be detected until the vehicle has
been driven a small amount and the side
sensors or side cameras completely scan
the areas along the sides of the vehicle.
●
If a vehicle, person, animal, etc. is
detected by a side sensor or side camera,
but then leaves the detection area of the
side sensor or side camera, the system
will assume the object has not moved.
WARNING
Object warning function
■
In situations such as the following, the
function may not operate correctly, pos-
sibly leading to an accident. Proceed
carefully.
When starting off shortly after the
●
power switch is turned to ON and a
small vehicle or other object which
cannot be detected by a front side sen-
sor is next to the vehicle.
In the situation shown in the following
illustration, even if the vehicle starts off, as
the vehicle on the left will not be
detected and the object warning function
will not operate.
When an object or person is in a posi-
●
tion which cannot be detected by the
side sensors or side cameras.
When, after the side sensors or side
●
cameras have completed scanning the
areas along the sides of the vehicle, a
vehicle, person, or other object
approaches the side of the vehicle and
cannot be detected.
●
When the outside rear view mirror is
closed, the side sensors or side cam-
eras cannot detect objects.
If the 12-volt battery was discharged or
●
has been removed and installed, fold
and extend the outside rear view mir-
rors.
Advertisement
Table of Contents
