Table of Contents
Advertisement
If a door cannot be opened
using the door opener switch
If a door cannot be opened using the
door opener switch, it can be opened
using a manual release handle.
Operating a manual release
handle
NOTICE
Normally, the manual release handles
cannot be used to open the doors. To
enable manual release handle operation,
perform the following. If the following is
not performed and/or a manual release
handle is operated with force, it may
deform or be damaged.
Outside the vehicle
Pull the manual release handle
open the door.
Normally, the manual release handles
cannot be used to open the doors.
To open a door, enable manual release
handle operation. (P.529)
9-5. If a door cannot be opened or locked
Inside the vehicle
Pull the manual release handle
twice to open the door.
Pulling the handle once will enable
operation. Pulling the handle again will
open the door.
■
Manual release handle operating condi-
tions
If the vehicle is involved in a severe frontal
●
or rear collision, manual release handle
operation will be enabled for all of the
doors.
However, the manual release handle may
not become operable depending on the
force of the impact and conditions of the
collision.
●
When the 12-volt battery voltage drops
slowly while a door was unlocked
It may not work depending on how it is low-
ered.
to
●
When manual release handle operation
is enabled from inside the vehicle
When manual release handle operation
●
is enabled from outside the vehicle using
a mechanical key
529
9
Advertisement
Table of Contents
