Table of Contents
Advertisement
200
4-2. Adjusting the preferred driving position
3
Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.
■
To stop the position recall operation
part-way through
Perform any of the following:
Press the "SET" button.
●
●
Press button "1", "2" or "3".
Operate any of the seat adjustment
●
switches (only cancels seat position
recall).
●
Operate the tilt and telescopic steering
control switch (only cancels steering
wheel position recall).
Operating the driving position memory
■
after turning the power switch off
Registered seat positions can be recalled
up to 180 seconds after the driver's door is
opened and another 61 seconds after it is
closed again.
When the recorded seat position can-
■
not be recalled
The seat position may not be recalled in
some situations when the seat position is
recorded in a certain range.
For details, contact your Lexus dealer.
Jam protection function
■
While the driving position is recalled or the
power easy access system is operating, if an
object is stuck behind the front seat, the
front seat will stop and then slightly move
forward. When the jam protection function
operates, the seat stops at a position other
than the set seat position. Check the seat
position.
Recalling a driving position
■
Take care so that a head restraint does not
contact the ceiling or a sun visor.
Using the voice control system
■
*
: If equipped
The following operations can be performed
using the voice control system:
●
Driving position registration
●
Driving position recall (only when the
shift position is in P)
For details, refer to the "MULTIMEDIA
OWNER'S MANUAL"
Registering/canceling/recall a
driving position to an electronic
key (memory recall function)
(driver's side only)
Identifying a driver with the elec-
■
tronic key assigned and registered
in My Settings
The driving positions can be automati-
cally recalled for each registered
driver by registering electronic key
assignments in My Settings.
Driving position registration proce-
dure
When the shift position is shifted to P after
driving the vehicle, the current driving
position will be recorded.
Driving position recall procedure
1
Carry only the key that has been
assigned and registered in My Set-
tings, and then unlock and open the
driver's door using the smart
access system with push-button
start or wireless remote control.
The driving position other than the steering
wheel and head-up display (if equipped)
will move to the recorded position. How-
*
Advertisement
Table of Contents
