526
9-5. If a door cannot be opened or locked
Restarting the EV system when
the 12-volt battery is discharged
If you have a set of jumper (or booster)
cables and a second vehicle with a
12-volt battery, you can jump start your
vehicle by following the steps below.
The EV system cannot be started by
push-starting.
WARNING
■
Avoiding 12-volt battery fires or
explosions
Observe the following precautions to
prevent accidentally igniting the flamma-
ble gas that may be emitted from the
12-volt battery:
●
Make sure each jumper cable is con-
nected to the correct terminal and that
it is not unintentionally in contact with
any other than the intended terminal.
Do not allow the other end of the
●
jumper cable connected to the "+" ter-
minal to come into contact with any
other parts or metal surfaces in the
area, such as brackets or unpainted
metal.
1
Confirm that the electronic key is being carried.
When connecting the jumper (or booster) cables, depending on the situation, the alarm
●
Do not allow the + and - clamps of the
jumper cables to come into contact
with each other.
Do not smoke, use matches, cigarette
●
lighters or allow open flame near the
12-volt battery.
12-volt battery precautions
■
The 12-volt battery contains poisonous
and corrosive acidic electrolyte, while
related parts contain lead and lead com-
pounds. Observe the following precau-
tions when handling the 12-volt battery:
●
When working with the 12-volt battery,
always wear safety glasses and take
care not to allow any battery fluids
(acid) to come into contact with skin,
clothing or the vehicle body.
●
Do not lean over the 12-volt battery.
In the event that battery fluid comes
●
into contact with the skin or eyes,
immediately wash the affected area
with water and seek medical attention.
Place a wet sponge or cloth over the
affected area until medical attention
can be received.
Always wash your hands after handling
●
the 12-volt battery support, terminals,
and other battery-related parts.
●
Do not allow children near the 12-volt
battery.