Table of Contents
Advertisement
228
4-5. Using the interior features
Use the wireless charger
1
Place a portable device on the
charging tray.
Depending on the portable device, its
charging coil may not be in the center of
the device. In this case, place the portable
device so that its charging coil is centered
in the charging area.
While charging, the operation indicator
light on the charging tray (orange) will be
illuminated.
If charging does not begin, move the porta-
ble device as close to the center of the
charging area as possible. If charging is not
performed, the operation indicator light
will slowly illuminate in green and orange
alternatively and a sound of charging coil
operation may be heard repeatedly.
When charging is complete, the operation
indicator light on the charging tray (green)
will illuminate.
AM radio broadcast linked function
■
during charging
●
During charging, if noise occurs when lis-
tening to the AM radio, the charging fre-
quency is automatically changed to
reduce the noise.
Rapid charging may not be performed as
●
AM radio reception is prioritized.
●
When automatically seeking AM radio
stations, charging will be suspended to
prevent charging noise from being
detected as a radio station. At this time,
the operation indicator light of the
charging tray will illuminate in green and
the operation indicator light of the center
display will be gray. Charging will resume
automatically when seek tuning is
stopped.
■
Recharging function
If a certain amount of time has elapsed
●
since charging completed and the porta-
ble device has not been moved, the wire-
less charger will restart charging.
●
If a portable device is moved significantly
within the charging area, the charging
coil may disconnect and charging may
temporarily be stopped. However, if a
charging coil is detected within the
charging area, the charging coil inside
the wireless charger will move near the
other coil and charging will resume.
Rapid charging function
■
Portable devices, such as the following, can
be rapidly charged.
●
Rapid charging capable devices which
conform to WPC Ver 1.2.4 EPP
(Extended Power profile)
7.5 W charging capable iPhones (iPhone
●
8 and later)
■
Situations in which the wireless charger
may not operate correctly
In the following situations, the wireless char-
ger may not operate correctly:
●
When a portable device is fully charged
●
When a portable device is being charged
by a wired connection.
When there is foreign matter between
●
the charging area and portable device
●
When the temperature of a portable
device becomes high while charging
When the temperature near the charging
●
tray is 95 °F (35 °C) or more due to
being in direct sunlight, etc.
●
When a portable device is placed with its
charging surface facing up
●
When a charging coil inside the portable
device is not centered on the charging
area
When a portable device is larger than the
●
charging tray
●
When a foldable portable device is
Advertisement
Table of Contents
