Table of Contents
Advertisement
bottle, contact your Lexus dealer or contact
your local government for information on
the appropriate authorized waste disposal
method.
Taking out the emergency tire
puncture repair kit
1
Fold the deck board.
2
Remove the deck side board.
3
Take out the emergency tire punc-
ture repair kit.
Repairing a flat tire
WARNING
Observe the following when repairing a
flat tire.
Stop your vehicle in a safe and flat
●
area.
9-4. If a tire is flat
●
Do not touch the wheels or the area
around the brakes immediately after
the vehicle has been driven.
After the vehicle has been driven, the
wheels and the area around the brakes
may be extremely hot. Touching these
areas with hands, feet or other body
parts may result in burns.
●
Perform repairs according to the spec-
ified procedure.
If the procedure is not followed, the tire
sealant may spray.
NOTICE
■
Precautions for repairing a flat tire
●
Perform the emergency repair with-
out removing the nail or screw that has
punctured the tread of the tire. If the
object that has punctured the tire is
removed, repair by the emergency tire
puncture repair kit may not be possi-
ble.
The kit is not waterproof. Make sure
●
that the kit is not exposed to water,
such as when it is being used in the
rain.
Do not put the kit directly onto dusty
●
ground such as sand at the side of the
road. If the kit vacuums up dust, etc., a
malfunction may occur.
●
Make sure to stand the kit with the bot-
tle vertical. The kit cannot work prop-
erly if it is laid on its side.
■
Handling the emergency tire punc-
ture repair kit
●
The compressor power source should
be 12 V DC suitable for vehicle use.
Do not connect the compressor to any
other source.
Take care not to allow gasoline to con-
●
tact the emergency tire puncture
repair kit. If gasoline splatters on the
kit, it may deteriorate.
515
9
Advertisement
Table of Contents
