Table of Contents
Advertisement
ever, the seat will move to a position slightly
behind the recorded position in order to
make entering the vehicle easier.
If the driving position is in a position that
has already been recorded, the driving
position will not move.
2
Turn the power switch to ACC or
ON.
The seat, steering wheel and head-up dis-
play (if equipped) (only when the power
switch is in ON) will move to the recorded
position.
Memory recall function cancelation
procedure
Initialize the driver registered settings in
My Settings.
For information on initializing driver regis-
tered settings, refer to the "MULTIMEDIA
OWNER'S MANUAL".
Identifying a driver with face infor-
■
mation assigned and registered in
My Settings
The driving positions can be automati-
cally recalled for each registered
driver by registering face information
in the face authentication system and
registering the face information assign-
ment in My Settings.
Driving position registration proce-
dure
When the shift position is shifted to P after
driving the vehicle, the current driving
position will be recorded.
Driving position recall procedure
Turn the power switch to ACC or ON.
After face authentication is performed
successfully, the seat, steering wheel, and
head-up display will move to the registered
driving position (only when the power
switch is turned on). They will not move if
4-2. Adjusting the preferred driving position
already in the registered driving position.
If the driving position is in a position that
has already been recorded, the driving
position will not move.
Memory recall function cancelation
procedure
Delete face information from the face
authentication system.
For information on deleting fingerprint
information, refer to the "MULTIMEDIA
OWNER'S MANUAL".
Vehicles without a My Settings
■
function
Each electronic key can be registered
to automatically recall your preferred
driving position.
Driving position registration proce-
dure
Record your driving position to button
"1", "2" or "3" before performing the
following:
Carry only the key you want to register,
and then close the driver's door.
If 2 or more keys are in the vehicle, the
driving position cannot be recorded
properly.
1
Check that the shift position is in P.
2
Turn the power switch to ON.
3
Recall the driving position that you
want to record.
4
While pressing the recalled button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds.
If the button could not be registered, the
buzzer sounds continuously for approxi-
201
4
Advertisement
Table of Contents
