Table of Contents
Advertisement
54
1-3. Charging with the EV system
WARNING
The onboard traction battery charger
●
is hot during charging. Do not touch
the onboard traction battery charger,
as doing so may result in burns.
●
Do not disassemble, repair or modify
the onboard traction battery charger.
When the onboard traction battery
charger needs to be repaired, consult
your Lexus dealer.
NOTICE
When charging
■
Do not insert the plug into the AC
charging inlet.
The AC charging inlet may be damaged.
Using private power generator
■
Do not use private power generators as a
power source for charging.
Doing so may make charging unstable,
the voltage may be insufficient, and the
charging operation may stop.
■
Charging station
Due to the environment in which the
power equipment is located, charging
may be unstable due to noise, the voltage
may be insufficient, and the charging
operation may stop.
After charging
1
Unlock the doors to unlock the
charging connector. (P.39)
The charging connector will be unlocked
and the charging inlet light will illuminate
when the doors are unlocked.
2
Pull the charging connector
towards you while pressing the
latch release button.
If the latch release button is pressed during
charging (while the charging indicator is
illuminated), charging will be interrupted.
3
Attach the charging connector cap.
4
Close the charging port lid.
5
Remove the plug from the socket
when the charging equipment will
not be used for a prolonged period
of time.
Hold the body of the plug when removing.
Make sure to put the cable away immedi-
ately after disconnecting. (P.35)
When leaving the plug inserted, inspect
the plug and connector once a month to
Advertisement
Table of Contents
