Table of Contents
Advertisement
400
6-3. Reducing impact to the occupants in a collision
SRS driver airbag/front passenger airbag
A
Help reduce impact to the head and chest of the driver and front passenger
SRS knee airbags
B
Help reduce impact to the driver and front passenger
SRS side airbags
C
Help reduce impact to the chest of the occupants of the front seats
SRS curtain shield airbags
D
• Help reduce impact to the heads of the occupants of the front and rear outer seats
• Can help prevent the occupants from being thrown from the vehicle in the event of vehi-
cle rollover
Your vehicle is equipped with
ADVANCED AIRBAGS designed
based on US motor vehicle safety stan-
dards (FMVSS208). The airbag sen-
sor assembly (ECU) controls airbag
deployment based on information
obtained from the sensors, etc., shown
in the system components diagram
above. This information includes crash
severity and occupant information. As
the airbags deploy, a chemical reaction
in the inflators quickly fills the airbags
with non-toxic gas to help restrain the
motion of the occupants.
■
If the SRS airbags deploy (inflate)
Slight abrasions, burns, bruising, etc., may
●
be sustained from SRS airbags, due to the
extremely high speed of deployment
(inflation) by hot gases.
●
A loud noise and white powder will be
emitted.
●
Parts of the airbag module (steering
wheel hub, airbag cover and inflator) as
well as the parts around the airbags may
be hot for several minutes. The airbag
Advertisement
Table of Contents
