Lexus RZ450E 2023 Owner's Manual page 160

160
2-3. Parking the vehicle
rapidly: The garage door opener
motor or other device is equipped
with a rolling code. To complete
programming, firmly press and hold
®
the HomeLink button for 2 sec-
onds then release it.
 If the garage door or other device
does not operate, proceed to
P.160
5 Repeat the steps above to program
another device for any of the
remaining HomeLink
Programming a rolling code sys-
tem
Two or more people may be necessary
to complete rolling code program-
ming.
1
Locate the "Learn" or "Smart" but-
ton on the garage door opener
motor in the garage.
This button can usually be found where the
hanging antenna wire is attached to the
unit. The name and color of the button may
vary by manufacturer. Refer to the owner's
manual supplied with the garage door
opener motor for details.
2
Press and release the "Learn" or
"Smart" button.
Perform 3 within 30 seconds after per-
forming 2.
3 Press and hold the desired Home-
Link
for 2 seconds and release it. Repeat
®
buttons.
this sequence (press/hold/release)
up to 3 times to complete pro-
gramming.
If the garage door opener motor operates
when the HomeLink
the garage door opener motor recognizes
the HomeLink
Vehicles with auto anti-glare inside

rear view mirror
®
button (inside the vehicle)
®
button is pressed,
®
signal.