Table of Contents
Advertisement
is changed in the charging current setting
of the vehicle (P.52)
●
When the battery heater operates.
(P.43)
●
When the traction battery cooler is oper-
ated before charging. (P.43)
When the plug generates heat due to a
●
loose socket connection, etc.
●
When frequently and repeatedly using
DC charging.
When selecting "DC charging power"
●
setting other than "Max". (P.57)
●
When the temperature of
charging-related parts is high.
AC charging power
■
AC charging of up to approximately 7 kW
can be performed on this vehicle.
However, depending on the used charger
or AC charging cable, charging power may
be limited.
When performing charging in
■
extremely cold conditions
When the outside temperature is extremely
low, it may take longer than usual to charge
the vehicle.
Before starting charging, it is recom-
mended to remove snow or ice that covers
the hood, front grille, and front bumper and
install a car cover, etc.
1-3. Charging with the EV system
How to use AC charging
This section explains the procedure
for charging the traction battery
with an AC charging cable.
When using an AC charger, make
sure to check the operation
instructions of the AC charger.
When the charging schedule is reg-
istered, make sure "Charge Now"
is turned on before charging.
(P.63, 64)
NOTICE
■
When using the AC charging cable
and related parts
To prevent damage to the AC charging
cable and related parts, observe the fol-
lowing precautions.
When interrupting or canceling
●
charging, remove the charging con-
nector before removing the plug.
When removing the AC charging
●
cable, check that the charging con-
nector is unlocked.
●
Do not forcefully pull the charging
connector cap.
●
Do not apply a vibration to the
charging connector while charging.
Charging may be stopped.
Do not insert anything but the
●
charging connector into the AC
charging inlet.
When inserting the plug into or
●
removing the plug from the socket,
make sure to hold the body of the plug.
Do not forcefully pull the AC charging
●
cable that is caught or entangled. If the
cable is entangled, disentangle it
before using.
49
1
Advertisement
Table of Contents
