Table of Contents
Advertisement
390
6-2. Using the safe driving support functions
Situations in which the parallel exiting
■
function will not operate
In situations such as the following, the paral-
lel exiting function will not operate:
●
When vehicles waiting at a traffic signal in
the exit direction
●
When a vehicle is stopped in the area
behind where the vehicle will exit
When a wall, column, or person is
●
detected as near a front or rear side sen-
sor
●
When the vehicle has been parked on a
curb and a side sensor detects the road
surface
●
When a vehicle is not parked in front of
the vehicle
●
When there is excessive space between
the front of the vehicle and a parked vehi-
cle
When the brakes have been operated
■
P.383
Advanced Park memory func-
tion
The memory function can be used to
park in a previously registered parking
space, even if there are no parking
space lines or adjacent parked vehi-
cles.
Up to 3 parking spaces can be registered.
Registering a parking space
1
Stop the vehicle with it aligned near
the center of the target parking
space.
Approximately 3.3 ft. (1 m)
A
2
Press the main switch and then
select
.
If the Advanced Park main switch is
pressed at a parking space without parking
lines or any adjacent parked vehicles, "No
available parking space" may be displayed.
Advertisement
Table of Contents
