Table of Contents
Advertisement
538
9-6. If the EV system cannot be used normally
Cause
AC charging connector is also connected.
The EV system is started.
When DC charging is interrupted
Cause
The timer for the DC charger operates.
The power for the DC charger is off.
The temperature of the traction battery is
extremely high or low.
Error is detected by the DC charger or vehi-
cle's system check.
High temperature of charging related parts
The electrical components such as the air
conditioning system stop operating while the
traction battery is approximately fully
charged.
Remedy
DC charging and AC charging cannot be
performed together.
When the EV system is started, DC
charging cannot be started.
Also, if the shift position is not in P, DC
charging cannot be performed.
Remedy
Depending on the type of the DC charger,
the timer may be set to stop charging after a
certain time.
Check with the charging station manager.
Check the power status of the DC charger. If
there are uncertainties with the power status,
contact the charging station manager.
DC charging may not be performed in
extremely high or extremely low tempera-
ture environments. Charge the traction bat-
tery after the temperature has been
stabilized.
There may be a malfunction with the DC
charger or charging system.
If there is a malfunction with the DC char-
ger, contact the facility manager.
If there is not a malfunction with the DC
charger, there may be a malfunction in the
system. Contact your Lexus dealer.
If the EV system cannot be started, con-
tact your Lexus dealer.
If the temperature of charging related parts
is high, DC charging may not be possible.
Wait for a while and then charge again.
Keep the electrical components such as the
air conditioning system in the OFF state, and
then perform the charging procedure again.
Advertisement
Table of Contents
