Lexus RZ450E 2023 Owner's Manual page 248

248
5-2. Functions of the displays
 Drive information 1 (P.252)
 Drive information 2 (P.253)
 Audio system-linked display
(P.255)
 Navigation system-linked dis-
*
play (P.255)
 Driving support system information
*
display (P.255)
 Blank (No items) (P.253)
*
: Displayed on the head-up display when
the display mode is set to display the
maximum.
■ Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
Changing the instrument panel light
■
brightness
P.258
WARNING
■ Caution for use while driving
● When operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around the
vehicle.
Do not look continuously at the
●
multi-information display while driving
as you may fail to see pedestrians,
objects on the road, etc. ahead of the
vehicle.
The information display at low tem-
■
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver's shifting and the regenerative
braking power appearing on the display.
This lag could cause the driver to down-
shift again, causing rapid and excessive
regenerative braking and possibly an
accident resulting in death or injury.
NOTICE
To prevent 12-volt battery discharge,
ensure that the EV system is operating
while setting up the display features.